Leibinger JET3 - Display Settings

Group 8 Job editor Page 168
Release R1.03e LEIBINGER JET3
8.4.7 Display settings
With this function you can activate different display options.
The following display options are available:
 mirrored  inverted
 alternating  proportional
An activated option is displayed with a √
in the control box.
Figure 102
Display options
 mirrored display: The printing element is mirrored horizontally.
 Inverse display: The printing element is displayed inverse.
Example:
For printing a black ink is used on a white medium.
Without the option <Invers> the letters of the printing text are written
in black.
With the option <Invers> the area around the letters will be blacken
and the characters stay white.
 Alternating display: Every second print out is displayed mirrored horizontally and
vertically.
 Proportional display: The printing object is displayed proportionally that means
unneeded blank fields between the single characters of the printing element can
be avoided.
Display:
normal proportional
Display:
alternating
1. Print 2. Print 3. Print etc.
Display: normal
horz. mirrored normal inverted