Leibinger JET3 - Switching on with Password Protetction

Group 6 Operation – Elements and procedures Page 57
Release R1.03e LEIBINGER JET3
6.4.3.2 Switching on with password protetction
Proceeding:
 Touch the dark Touch-Display (1) at any point. Period of touching approx. 2
sec..
 The device turns on and the main menu (2) is displayed with the message
<Initialization> (3).
 After the initialization the device starts with the bleeding of the system
automatically.
 During the process the message <Bleeding>
(4) is displayed. The bleeding
takes between 1 – 5 min. The process can be canceled by pressing the button
<Cancel> (5).
Note:
For starting the device the job which has been used at last will be loaded
automatically.
 The dialog field <Current login> (6) and a keyboard field (8) is faded in.
You will find further information regarding the operation with
keyboard fields in the Chapter Keyboard fields!
 Enter your password with the keyboard field.
 Press the button <Enter> (9) of the keyboard field to finish the input.
 Now press the button <Login> (10) to finish the login.
Attention! The login can be also carried out without a password.
In this case only several basic functions of the device are
available for the user.
You will find further information in the Chapter Password
protection!