Leibinger JET3 - Settings Configuration

Group 7 Data/Programming Page 73
Release R1.03e LEIBINGER JET3
Proceeding:
 Press the button <Job> (1) and the option <Load Job to print> (2) or the
accordant direct button [Icon] (3).
 The window <Job load> (4) is faded in.
 Select the requested job in the selection field <Job list> (5). With the Pop-up
window <Search in > (6) you can select different memory locations.
 The name of the selected job is now shown on the display <Filename>
(7).
Additionally a preview of the printing job is faded in on the display <Job
preview > (10).
 Press the button <Load> (12) to take over the selected job or press the button
<Cancel> (11) to cancel the process.
 A safety query (13), if the printing job should be really changed is faded in.
 Confirm the change by pressing the button <OK>
(14) or cancel the process
with the button <Cancel> (15).
7.3 Settings
With the button <Settings> in the main menu bar the submenu „Settings“ is displayed.
The following options are available:
 Basic settings  Hydraulic settings  I/O settings
 Password settings  Password active
Figure 32
Menu settings
1 – Button <Settings> 4 – Option <I/O Settings>
2 – Option <Basic Settings> 5 – Option <Password Settings>
3 – Option <Hydraulic Settings> 6 – Option <Password active>
1
2
3
4
5
6