Leibinger JET3 - Formatting Tool for Object Settings

Group 8 Job editor Page 154
Release R1.03e LEIBINGER JET3
8.2.4 Formatting tool
With the button <Format> you can select the formatting tool <Object> (2).
Further more you can also select the tool directly with the accordant Icon (3).
With the tool you can assign several object settings (e.g. font, contrast, alignment,
etc.) to the selected printing elements. The faded in menu depends on the selected
printing element (e.g. text, graphic, barcode, etc.).
Figure 89
Job editor (Formatting tool)
1 – Button <Format> 3 – Direct button (Icon)
2 – Formatting tool <Object>
You will find further information regarding the procedure of object
settings in the a chapter Object settings!
1
2
or
3