Group 8 Job editor Page 195
Release R1.03e LEIBINGER JET3
8.7.2.2 Carry out replacements
Further more accordant substitutions (numbers, letters or designations) for the date-
and time values can be generated in the functional area <Replacements> to get an
operating-specific display or coding of the specifications.
You will find further information regarding the execution of
substitutions in the chapter Replacements!
8.7.3 Counter
Provides bonding of individual programmable counters as well as definition of
counter parameters, font parameters and display options.
Further more accordant replacements (number or letters) can be generated to get a
operating specific display or coding of the specifications.
Attention! For leaving a job, the counter states of integrated job
counters are usually not saved, that means if you call up this job
again the counter states are already again on the start value. If the
print should be continued with the already existing counter states
you have to activate the function <Save counter states> in the
menu <Extras> in advance.
You will find further information also in the group Data
To Next Page
Loading...
