Leibinger JET3 - Replacements

Group 8 Job editor Page 203
Release R1.03e LEIBINGER JET3
 Carry out the inputs („002“ and „003“) accordingly for the further shift code
fields.
 Press the button <OK> (12) to take over the input and to close the menu.
or
 Press the button <Cancel> (13) to leave the menu without saving the inputs.
 In the menu <Jobeditor> (14) the fix text followed by the applied shift code are
displayed.
Note:
Displayed is the shift code which is currently valid ( as in the example the
night shift „003“).
8.8 Replacements
The LEIBINGER JET3 offers the possibility to exchange entered date- and time
specifications as well as counters by replacements (numbers, letters or
designations). Through this you can get an operating specific display or coding of
the information.
The definition of the replacements happens always in the functional area
<Replacements> of the concerned menu. The faded in functional area depends on
the substituted printing element.
Replacements can be also carried out for date- and time
specifications as well as for counters which are integrated in
barcodes.
The made settings are only valid for the current created or edit job or
for the selected printing element!
 In the Pop-up window <Type>
(1) you can select the element type for which
replacements should be generated.
 In the display field <Replacement> (2) the set replacements are displayed for
the selected element type.
 The buttons <Scroll> (3) allows the scrolling of the display field
<Replacements>.
 With the button <Default>
(4) you can reset the definitions of the replacements
to the standard values.
Note:
The resetting of thereplacements has only effects on the current created
or edit job or on the selected printing element!
 With the button <OK> (5) you can take over the inputs and close the menu.
 The button <Cancel> (6) closes the menu without saving the inputs.