Group 2 Safety instructions Page 15
Release R1.03e LEIBINGER JET3
2.3 Intended use
The high performance printer JET3 serves exclusively the contact-free marking,
inscribing and coding of surfaces using the continuous ink jet process.
The high performance printer can be used on the most varying materials (e.g. metal,
synthetic material, glass, paper, wood, pressed materials, rubber etc.) with both,
smooth as well as uneven, rough and stepped surfaces.
The intended use of this device also includes the observance of all
instructions in this manual.
Using the installation for other purposes is considered contrary to its
intended use!
For safety reasons conversions and alterations are only admissible
following consultation with the manufacturer. Repairs to the device
must only be carried out with original replacement parts.
The manufacturer shall not be liable for damage resulting from use for
other than the intended purpose or misuse.
To Next Page
Loading...
