Leibinger JET3 - Definition of Password; Selection of User Level

Group 7 Data/Programming Page 86
Release R1.03e LEIBINGER JET3
7.3.2.1.1 Selection of user level (Level of access authorization)
With the pop-up window <Level>
(1) you can select the user level for which the
user rights should be activated as well as how the password should be defined.
Figure 42
Selection of user level (Level of access authorization)
1 – Pop-up window <Level>
7.3.2.1.2 Definition of password
In the input field <Password>
(1) you can enter the password for the current user
level or you can display an already defined password.
Proceeding:
Example: The password „Leibinger“ should be defined.
 Click in the input field <Password> (1). A keyboard field (2) opens for input.
You will find further information regarding the operation with
keyboard fields in the Chapter Keyboard field!
 Enter the password „Leibinger“. The input is displayed in the input field
<Password> (1).
 Press the button <Enter> (3) of the keyboard field to finish the input.
 Now press the button <set…> (4) to take over the entered password.
Attention! A final taking over does only happen if the menu is
closed with the button <OK>!
1