Leibinger JET3 - Basic Settings: Factory Settings

Group 7 Data/Programming Page 82
Release R1.03e LEIBINGER JET3
7.3.1.5 Factory Settings
Under the register card <Factory settings>
you can reset the printer adjustments
to the standard settings.
The consequences of resetting to the factory settings should be
considered!
Figure 40
Reset device to factory settings
1 – Menu <Basic Settings> 5 – Button <Cancel>
2 –Register card <Factory Settings> 6 – Button <OK>
3 –Button <Reset> 7 – Message <Restart>
4 – Safety query <Continue> 8 – Button <OK>
4
2
1
3
6
5
7
8