Group 7 Data/Programming Page 83
Release R1.03e LEIBINGER JET3
Proceeding:
Press on the register card <Factory Settings> (2) to select the functional area.
Press the button <Reset> (3).
A Safety query (4) if you would like to continue with the process is faded in.
Press the button <Cancel> (5) to abort the process or press the button <OK>
(6) to reset the device.
The message <Restart> (7) is faded in.
Press the button <OK> (8). The device is shut down automatically and will be
rebooted afterwards. After this process the JET3 is reset to the standard
settings.
To Next Page
Loading...
