Leibinger JET3 - Printgo-Holdoff Distance

Group 8 Job editor Page 172
Release R1.03e LEIBINGER JET3
8.5.1.4 PrintGo-holdoff distance
The setting provides a filtering of unrequested PrintGo-signals (e.g. PrintGo with
bounces or double releases). The value defines a length „x“ after the PrintGo-signal
in which every further signal will be ignored.
The input is carried out in the measurement which has been selected in the basic
settings.
The set value is shown on the accordant display field.
Figure 106
PrintGo-holdoff distance
PrintGo with „chatters“:
Filterin
g
active
PG Signal(s)
Double releases:
Text Text Text Text Text Text
PG Signal(s)
Filterin
g
active
Printer’s
im
p
rint
Printer’s
im
p
rint
Object which
should be
p
rinted