Group 6 Operation – Elements and procedures Page 61
Release R1.03e LEIBINGER JET3
Proceeding:
Press on the status field <Product Counter> (1).
A safety query (2), if the counter should be really changed is faded in.
Confirm the query by pressing on the button <OK>
(3) or cancel the process
with the button <Cancel> (4).
The window <Product Counter Settings> (5) is faded in.
Change the value of the counter with the Arrow buttons (6). The value of the
counter will be increased or reduced by pressing on the corresponding buttons.
or
Click in the Counter display field (7). The number block (8) opens for input.
You will find further information regarding the operation with
number blocks in chapter Number blocks!
Confirm the change of values by pressing on the button <Set> (9) or cancel
the process with the button <Cancel> (10).
To Next Page
Loading...
