Leibinger JET3 - Page 184

Group 8 Job editor Page 184
Release R1.03e LEIBINGER JET3
 The menu <Date Change Parameter> (3) is faded in.
 Select in the pop-up window <Offset-direction> (4) the direction (+/-) of the
shifting.
 Now mark in the display field <Offset-value> (5) the hour- or minute block to
change the values.
 With the two <Arrow buttons>
(6) you can increase or reduce the values of
the marked block.
 Press the button <OK> (7) to take over the settings and to close the menu.
or
 Press the button <Cancel>
(8) to leave the menu without saving the
changes.