The printed event log can be faxed to your next level of support for verification or diagnosis.
To print the event log:
1 Select Event Log from Diag Menu, and press Select .
2 Select Print Log, and press Select.
3 Press Back to return to Event Log.
Clear Log
Use Clear Log to remove the current information in the Event Log. This affects both the viewed log and the printed log
information.
To clear the event log:
1 Select Event Log from Diag Menu, and press Select .
2 Select Clear Log, and press Select.
3 Select YES to clear the Event Log or NO to exit the Clear Log menu. If YES is selected, the Deleting EVENT
LOG displays on the screen.
4 Press Back to return to Event Log.
Exit Diagnostics
Press Select to exit Diag Menu. The printer performs a power-on reset and returns to normal mode.
Configuration menu
Entering configuration mode
The Configuration Menu group contains a set of menus, settings, and operations which are infrequently required by a
user. Generally, the options made available in this menu group are used to configure a printer for operation.
For CS310 models:
1 Turn off the printer.
2 Press and hold the OK and Right buttons.
3 Turn on the printer.
4 Release the buttons after 10 seconds.
For CS410 and CS510 models:
1 Turn off the printer.
2 Press and hold the 2 and 6 buttons.
3 Turn on the printer.
4 Release the buttons after 10 seconds.
5027
Service menus
184
To Next Page
Loading...
Need help?
General
