Lexmark CS310 User Manual

Appendix A: Printer specifications
• “Power specifications” on page 333
• “Electrical specifications” on page 333
• “Operating clearances” on page 334
• “Acoustics” on page 336
• “Environment” on page 336
• “Processor” on page 337
Power specifications
The average nominal power requirements for the base printer configuration are shown in the following table (power
levels are shown in watts):
Note: Some modes may not apply to all models.
Printing states Power
Off 0.0W
Sleep Mode 7W
Hibernate Mode 1W
Standby Mode 50W
Ready Mode 40W
Simplex printing 500W
Duplex printing 550W
Maximum current shown in amp ergs.
Notes:
• Using a power converter or inverter is not recommended.
• The CS310, CS410, and CS510 models are ENERGY STAR Qualified.
• All models ship with Sleep Mode set to On.
Electrical specifications
Low-voltage models
• 100 to 127 V ac at 50 to 60 hertz (Hz) nominal
• 90 to 137 V ac, extreme
High-voltage models
• 220 to 240 V ac at 50 to 60 hertz (Hz) nominal (not available in all countries and regions)
5027
Appendix A: Printer specifications
333

Lexmark CS310 Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 60, 000 pages
Standard Memory	256 MB
Processor Speed	800 MHz
Standard Input Capacity	250 sheets
Connectivity	USB 2.0, Ethernet
Standard Output Capacity	125 sheets
Recommended Monthly Page Volume	500 - 3, 000 pages
Operating Systems Supported	Windows, Linux