Lexmark CS310 User Manual

3 Remove the six screws (B).
4 Remove the LVPS.
Warning—Potential Damage: If you receive a new low-voltage power supply with a voltage selector switch (C), then
be sure to set the switch to the correct setting for your voltage requirements before installing the low-voltage power
supply. The switch can be set for either 115 V or 230 V. Failure to do so could result in damage to the power supply.
Note: If there is no switch, the LVPS automatically senses the line voltage.
5027
Repair information
227

Lexmark CS310 Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 60, 000 pages
Standard Memory	256 MB
Processor Speed	800 MHz
Standard Input Capacity	250 sheets
Connectivity	USB 2.0, Ethernet
Standard Output Capacity	125 sheets
Recommended Monthly Page Volume	500 - 3, 000 pages
Operating Systems Supported	Windows, Linux