Lexmark CS310 User Manual

200 paper jam messages
Error code Description Action
200.xx A single page of media jam at the input (S2)
sensor.
Multiple pages of media are jammed at the
input sensor.
Go to
“Input sensor (S2) jam service check” on page 49.
200.01 The input (S2) sensor is obstructed. Go to
“Input sensor (S2) jam service check” on page 49.
200.02 The input (S2) sensor was made early. Go to
“Input sensor (S2) jam service check” on page 49.
200.03 The input (S2) sensor did not make. Go to
“Input sensor (S2) jam service check” on page 49.
200.05 The input (S2) sensor did not break. Go to
“Input sensor (S2) jam service check” on page 49.
200.20 The staging motor has an error. Go to
“Paper pick motor drive assembly service check” on
page 96.
200.21 The staging motor has an error. Go to
“Paper pick motor drive assembly service check” on
page 96.
200.22 The staging motor has an error. Go to
“Paper pick motor drive assembly service check” on
page 96.
201.xx A software induced stoppage has occurred.
This should not happen in the field.
POR the printer.
Input sensor (S2) jam service check
The input (S2) sensor is part of the paper pick motor drive assembly FRU, and is not available otherwise.
Actions Yes No
Step 1
a Pull out tray 1.
b Remove the jammed page(s).
Does the error clear?
Problem resolved. Go to step 2.
5027
Diagnostic information
49

Lexmark CS310 Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 60, 000 pages
Standard Memory	256 MB
Processor Speed	800 MHz
Standard Input Capacity	250 sheets
Connectivity	USB 2.0, Ethernet
Standard Output Capacity	125 sheets
Recommended Monthly Page Volume	500 - 3, 000 pages
Operating Systems Supported	Windows, Linux