1 Introduction
Your industrial truck
Your industrial truck
offers optimum economic efficiency, safety
and driving comfort. It is primarily down to
you to maintain these characteristics for a
long time and take advantage of the resulting
benefits.
During manufacture:
• all safety requirements of t
he relevant EC
directives were observed
• all conformity assessment procedures
stipulated in the applicable directives were
carried out
This is attested by the CE mark shown on the
nameplate.
These operating instruct
ions contain every-
thing you need to know abou
t commissioning,
driving and maintenance.
A number of items of special equipment have
their own operating instructions, which are
supplied along with these devices.
Observe the operating instructions for the
industrial truck version in question.
Carryoutthespecifiedw
ork regularly, at
the due times and using t
he consumables
envisaged for this purp
ose in accordance with
the inspection and main
tenance overview.
The designations used in the text: front - rear
- left - right - always refer to the installation
position of the parts described, with forwards
as the drive direction (fork arms forwards) for
the industrial truck.
Servicing work not described here will require
specialist knowledge, measuring devices and
frequently also special tools.
Contact the service pa
rtner for more informa-
tion.
Servicing should only be carried out by quali-
fied personnel approved by the manufacturer
(specialists).
With orders for parts, please specify the
following along with the parts numbers:
Industrial truck model:
Production number /
year of manufacture:
Handover date:
The production number should also be speci-
fied for parts from the following units: lift mast,
drive axle and steering axle.
Lift mast number:
Lift mast lift:
Drive axle number:
Steering axle number
When you receive the i
ndustrial truck, copy
this data from the ide
ntification plates of the
units into these oper
ating instructions.
NOTE
In the event of repairs, only use genuine spare
parts from the manufacturer. This is the only
way to guarantee that the industrial truck will
remain in the same technical condition as
when it was received.
Please address all queries relating to the
industrial truck and orders for spare parts to
your service partner only, stating your mailing
address.
The company, i.e. the manufacturer, is con-
stantly engaged in the further development of
its products.
We ask for your understanding that, in the
interest of progress, illustrations and technical
data are subject to technical modifications in
terms of form, equipment and expertise.
For this reason, no claims can be asserted
on the basis of the following data, figures and
descriptions in these operating instructions.
These operating instructions must not be
reproduced, translated or made accessible to
third parties—including as excerpts—except
with the express written approval of the
manufacturer.
2 Operating Instructions – 3888011701 EN – 12/2017
To Next Page
Loading...
