Operation
4
Driver's compartment
Comfort driver's seat with air
suspension
WARNING
If the seat is not adjusted correctly, this may cause
injury to the driver's back. The setting devices for
the driver's seat must not be used during operation
of the truck.
Before commissioning the truck each time and
whenever changing drivers, adjust the seat to
correspond to the driver's weight and make sure
that the settings have all engaged properly. Do not
place any objects in the driver's rotation range.
NOTE
Sitting for long periods of time puts a lot of
pressure on the spine. This can be prevented
by performing simple therapeutic exercises at
regular intervals.
2
1
e3881123
Longitudinal adjustment
Pull the lever (1)
upwards.
Choose the most comfortable position in rela-
tion to the steering wheel and the accelerator
pedals.
Move the driver's seat forwards or back-
wards in the rails.
Allow the leve
r (1) to snap into place.
Adjusting the s
eat backrest
Push the lever (2) upwards and hold it in
place.
Move the seat backrest forwards or back-
wards until a comfortable seat position for
the driver is found.
Release the
lever (2).
Operating Instructions – 3888011701 EN – 12/2017 61
To Next Page
Loading...
