Operation
4
Pre-shift checks
Pre-shift checks
Chassis, bodywork and fittings
Check that the adjusting mecha
nism on the steering column is secure.
Driver's seat and seat belt: c
heck condition (visual inspection).
Check the container in the w
asher system.
Roof panel (special equip
ment): check condition (visual inspection).
Chassis frame
Check the tyres and rims (
tread, external damage, air pressure).
Check the condition of the antistatic belt and check the ground contact (only when using tyres that
are not antistatic).
Brake system: test the service brake and parking brake.
Check the steering.
Electrics
Check the condition of the drive battery.
Check the electrical system (e.g. lighting, warning units, assistance systems).
Hydraulics
Hydraulic system: check the oil level.
Check the truck for leaks (visual inspection).
Load lift system
Check the fork arms and arm safety devices.
.
Regular m
aintenance
Perfor
ming the maintenance tasks listed will
increa
se the availability of the truck and help
mainta
in its value.
Carry out this work as frequently as possible in
accordance with the application conditions.
• Clean t
he truck.
• Lubricate the steering axle.
• Tighten the wheel fastenings (after each
maintenance or repair, and after 100 oper-
ating hours at the latest).
• Clean the
lift mast chain and apply chain
spray.
• Clean and lubricate the sideshift (special
equipment).
• Clean and lubricate the fork prong posi-
tioner (special equipment).
Operating Instructions – 3888011701 EN – 12/2017 55
To Next Page
Loading...
