Operation
4
Driver's compartment
e3871456
1
2
3
4
5
Pull the seat belt (3) smoothly out of the belt
retractor (1) to the left.
Position belt over the lap, no
toverthe
stomach.
Allow the latch plate (2) to snap into place in
the buckle (4).
Check seat belt tension.
The belt must fit close to the
body.
Unfastening the seat belt
Push the red button (5) on the buckle (4).
Manually return the buckle guide (2) to the
belt retractor (1).
NOTE
The automatic blocking mechanism may be
triggered if the web belt runs in too quickly and
the buckle guide strikes the housing. The web
belt cannot be pulled out with normal force.
Operating Instructions – 3888011701 EN – 12/2017 73
To Next Page
Loading...
