Operation
4
Driver's compartment
Minimum distance between head
and overhead guard
Certain versions (e.g. those with a rotary seat
or container roof) have a reduced clearance
between the seat and overhead guard.
WARNING
Risk of head injuries.
The truck may only be used by persons whose
normal operating posture is such that there is a
minimum distance of 30 mm between their head
and the overhead guard.
Standard seat and comfort driver's
seat
WARNING
If the seat is not adjusted correctly, this may cause
injury to the driver's back. The setting devices for
the driver's seat must not be used during operation
of the truck.
Before commissioning the truck each time and
whenever changing drivers, adjust the seat to
correspond to the driver's weight and make sure
that the settings have all engaged properly. Do not
place any objects in the driver's rotation range.
NOTE
Sitting for long periods of time puts a lot of
pressure on the spine. This can be prevented
by performing simple therapeutic exercises at
regular intervals.
Operating Instructions – 3888011701 EN – 12/2017 57
To Next Page
Loading...
