5
Service work
Service plan
Service plan
Note regarding servicing work
Specialist knowledge and special tools are required for servicing work.
Contact your service partner.
Preparatory tasks
Clean the truck.
Check that the labelling is complete and legible.
Read out and clear the error memory.
Calibrate the drive potentiometer and the joysticks.
Enter the next service interval.
Regular service, at least every 12 months
Gearbox
Check the oil level in the planetary transmission and check for leak tightness.
Chassis, bodywork and fittings
Check and lubricate the bearing points and joints.
Lubricate the bolts, hinges and interlocks on the battery door and the battery hood.
Check the battery side stop in the battery compartment.
Check the condi
tion of the seat belt and check for correct operation.
Chassis frame
Check the wheels for damage, foreign objects and wear.
Check the condition of the antistatic belt.
Lubricate the steering axle.
Operating devices
Check that the brake system (service brake, parking brake) is working correctly
Check and lubricate the pedal group.
Electrical enclosure
Check th
e heat sinks on the power modules for contamination and clean the heat sinks.
Check the condition of the electrical components on the contactor carrier and clean the compo-
nents.
Clean the fans.
Check the condition of the drive battery.
212 Operating Instructions – 3888011701 EN – 12/2017
To Next Page
Loading...
