Linde E35 - Hose Lines: Checking the Pre-Load

5
Service work
Hydraulics
1
d3911395
Hose lines:
Checking the pre-load
NOTE
For vehicles with the standard lift mast and
auxiliary hydraulics attached, the pre-tension
of the double hoses must be checked.
The pre-tension of the double hoses should
be 5-10 mm per metre, according to the initial
length.
 Adjust the pre-load by sliding the hoses in
the retaining clips (1) to the specified point.
250 Operating Instructions – 3888011701 EN – 12/2017