Linde E35 - Tightening the Wheel Fastenings

5
Service work
Chassis frame
 Tighten the wheel fastenings.
Tightening torque:
Front 425 Nm
Rear 460 Nm
NOTE
Tighten the wheel fastenings after no more
than 100 operating hours.
e3871179
Tightening the wheel fastenings
The wheel fastenings must be tightened
before initial commissioning and whenever
wheels are changed or repairs are made.
Afterwards, tightening must take place after
100 operating hours at the latest.
The wheel fastenings must be tightened
crosswise.
Tightening torque:
Front 425 Nm
Rear 460 Nm
.
228 Operating Instructions – 3888011701 EN – 12/2017