4
Operation
Operation
Reducing
the driving speed
Reducing the driving speed helps the driver to
handle the industrial truck.
In the event of a potential malfunction, the
driver must have full control of the industrial
truck at all times. The responsibility for
operating the industrial truck in a safe manner
always lies with the driver.
NOTE
To prevent the operator from becoming too
accustomed to this supporting function,
regular training is recommended.
2
3
1
Display_e0048a
Reducing the driving speed
usingaswitch
The maximum driving speed can be exceeded
on a downhill gradient.
It is possible to limit the maximum driving
speedtoasetvalueusingaswitch(1).
The switch (1) is indicated by a tortoise symbol
and is located in the switch panel.
When a reduction in the driving speed is
activated via the switch (1), the green indicator
light (3) is illuminated on the display unit (2).
Actuate the switch (1).
The truck drives at a reduced speed.
148 Operating Instructions – 3888011701 EN – 12/2017
To Next Page
Loading...
