EasyManua.ls Logo

Linde E35 - Crane Loading

Linde E35
318 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Operation
Loading / transporting
DANGER
Thetruckmayslipifthelashingstrapsslip!
The truck must be lashed securely so that it cannot
move during transportation.
Make sure that the lashing straps are tightened
securely and that the pads cannot slip off.
Crane loading
NOTE
Crane loading operations may be performed
only by specially trained technicians.
DANGER
Risk of accident and risk to life
Do not walk under suspended loads!
When using a crane to load the truck,
pay particular attention to ensure that
nobody is in the working area of the
crane!
Use lifting gear and a loading crane
with a sufficient load capacity.
Note the loading weight on the
nameplate.
WARNING
Risk of accident due to the tilt cylinders being
damaged.
Before lifting the truck, retract the tilt cylinders as
far as they will go and fully lower the lift mast.
204 Operating Instructions 3888011701 EN 12/2017

Table of Contents

Related product manuals