5
Service work
Chassis, bodywork and fittings
e3871517
Battery compartment: Checki
ng the
battery side stop
Switch off the truck.
Open the battery hood.
Disconnect the battery male connector and
the battery female connector.
Unlock the battery door.
Open the battery door to the stop and
secure the battery door to prevent it from
swinging back.
Check the condition of the side battery
stop (see arrow) and check for ease of
movement; to do this, lift the battery stop
and fold the battery stop downwards.
Replace any damaged par
ts.
Checking the conditio
n and function
of the seat belt
DANGER
Risk of accident or danger to life if the restraint
system is faulty
Do not operate the industrial truck if the restraint
system is faulty.
NOTE
For safety reasons, check the condition and
function of the restraint system on a regular
basis (once a month).
Screw connections must be checked on
a regular basis to make sure that they are
secure.
After an acc
ident, the seat belt must be
replaced.
The driver's seat and the driver's seat mount-
ing must also be checked after an accident by
an authorised technician.
If you notice any irregularities in the function-
ing of the seat (e.g. seat suspension) or the
seat belt, contact your service partner imme-
diately for help with eliminating the cause.
224 Operating Instructions – 3888011701 EN – 12/2017
To Next Page
Loading...
