Linde E35 - Checking the Heat Sinks on the Power Modules for Contamination and Cleaning the Heat Sinks

Service work
5
Electrical enclosure
Checking the heat sinks on the
power modules for contamination
and cleaning the heat sinks
DANGER
When working in the area of the lift mast, there
is a risk of becoming trapped and/or the lift mast
accidentally lowering.
If the lift mast or fork carriage is raised, no work may
be performed at the front of the truck unless safety
measures are put in place.
ENVIRONMENT NOTE
Observe informati
on regarding working with
consumables.
e3871515a
Cleaning the heat
sink on the power
module for the tra
ction motors
The power module (see arrow) for the traction
motors is mounted on the drive axle.
 Extend the lift mast.
 Activate the ma
nual parking brake.
Operating Instructions – 3888011701 EN – 12/2017 237