Linde E35 - Stability; In the Case of Tip-Over

2
Safety
Stability
Even beyond the narrow danger areas of the
industrial truck itself, a residual risk cannot
be excluded. Persons in the area around the
industrial truck must exercise a heightened
degree of awareness, so that they can react
immediately in the event of any malfunction,
incident or breakdown.
DANGER
Persons in the vicinity of the industrial truck must
be instructed with regard to the dangers that arise
through use of the truck.
These operating instructions also contain additional
safety regulations.
Residual dangers can include:
• Escape of consumables due to leakages or
the rupture of lines, hoses or containers,
• Risk of accident when driving over difficult
ground such as gradients, smooth or
irregular surfaces, or with poor visibility,
• Risk of falling, tripping, sli
pping etc. during
movement of the industrial t
ruck, especially
in the wet, with leaking cons
umables or on
icy surfaces,
• Risk of fire and explosion due to the battery
and electrical voltages,
• Human error,
• Disregarding the safety reg
ulations,
• Risk caused by unrepaired damage,
• Risk caused by insufficient maintenance or
testing,
• Risk caused by using the wr
ong consum-
ables.
Stability
Stability is guarante
ed if your industrial truck is
used according to its i
ntended purpose.
Stability will not be g
uaranteed in the event of:
• cornering at excessive speeds,
• moving with the load raised,
• moving with a load that is prot
ruding to the
side (e.g. sideshift),
• turning and driving di
agonally across
descents or ascents,
• driving on descents or ascents with the load
on the downhill side,
• loads that are too wide,
• driving with a swinging l
oad,
• ramp edges or steps.
In the case of tip-ove
r
d3921101
• Stay buckled up
•Don'tjump
• Hold on tight
•Bracefeet
• Lean away
The stability of your industrial truck is ensured
if used properly and as intended. Should the
industrial truck tip over during an unapproved
application or due to incorrect operation,
always follow the instructions depicted above.
16 Operating Instructions – 3888011701 EN – 12/2017