Operation
4
Operation
Emergency off switch
The emergency off switch is used to bring the
truck into a safe condition in the event of a
malfunction or a dangerous situation.
Emergency off switch in normal opera-
tion
e3861469
1
Pull the actuation knob of
the emergency off
switch (1) upwards.
The emergency off switch is unlocked. The
truck is ready for operation.
Actuating the emergency off switch
WARNING
After the emergency off switch has been actuated,
battery voltage is still present at the components in
the electrical system.
To switch off the power supply to the truck com-
pletely (e.g. for service work), the battery male
connector must be disconnected from the battery
female connector.
Push the actuation knob (1) of the emer-
gency off switch downwards.
The electrical system of the truck is switched
off.
The driving, steering and lifting functions of
the truck are deactivated. The brake remains
active.
NOTE
If the emergency off switch is actuated during
travel, the truck is braked immediately. In
order to minimise the risk of the load falling off,
the brakes are applied with reduced braking
torque.
Operating Instructions – 3888011701 EN – 12/2017 113
To Next Page
Loading...
