Introduction 1
Technical description
• The hydraulic service brake, which is
actuated by using the stop pedal.
• The electrohydraulic parking brake, which
is activated manually by using the parking
brake switch.
• The electric regenerative bra
ke, or LBC
(Linde Brake Control) for en
ergy recovery,
which is automatically actu
ated when the
accelerator pedal is releas
ed or when the
drive direction is changed.
On request, the
LBC braking effect can be cha
nged using
the diagnostic program.
In addition, the truck has an automatic brake,
which is activated after a short delay when the
accelerator pedal is released.
Electrical system
The well-protected electrical system is posi-
tioned at the front, under the right-hand truck
console.
The required energy is supp
lied by the 80-V
battery built into the chas
sis.
A hinged side access panel allows the battery
to be changed quickly and easily.
Operating Instructions – 3888011701 EN – 12/2017 7
To Next Page
Loading...
