Operation
4
Operation
Brake system
DANGER
Risk of accident or death if the brake system is
faulty.
Your industrial truck must not be used under any
circumstances if the brake system is faulty.
If you notice any defects on the brake system,
please contact your service partner immediately.
DANGER
The truck's braking c
haracteristics are influenced
by factors such as the
viscosity of the oil. Using
a different oil (wit
h a different level of viscosity) to
that prescribed by
the manufacturer will affect the
braking characte
ristics and increase the risk of
accidents and ris
k to life.
Therefore, use o
nly the oil prescribed by the manu-
facturer (see i
nformation on consumables).
Contact your se
rvice partner.
2
e3871457
13
Actuating the
service brake via the stop
pedal
When the stop pedal (2) is pressed, the
multi-disc brake is actuated hydraulically.
NOTE
It is recommended that drivers familiarise
themselves with the function and effect of this
brake when there is no load on the industrial
truck. For this purpose, drivers must choose
a route with no other traffic and drive at a low
speed.
Actuate the stop pedal (2).
The braking effect will be greater or lesser
depending on how hard the stop pedal is
pressed.
Operating Instructions – 3888011701 EN – 12/2017 125
To Next Page
Loading...
