Linde E35 - Checking the Cables and the Plugs on the Drive Battery

5
Service work
Electrical enclosure
Checking the cables and the plugs
on the drive battery
 Open the battery hood fully and secure to
prevent it from being accidentally closed.
 Disconnect the battery male connector and
the battery female connector.
 Check the housing and the co
ntacts of the
battery male connector and
the battery
female connector for damag
e and check
that these components are i
n good working
order.
 Check the battery cables for damage
and that the battery cables are securely
attached.
 Replace any damaged parts.
236 Operating Instructions – 3888011701 EN – 12/2017