5
Service work
Consumables
Consumables
Hydraulic oil
CAUTION
Damage to the hydraulic system due to unapproved
hydraulic oil.
Use only approved hydraulic oils. Only the oils
listed below have the manufacturer's approval.
Do not mix hydraulic oils. If in doubt, contact
the service partner. Recommendations made
by representatives from the mineral oil industry
must also be agreed in advance with your service
partner.
Standard
(average constant oil temperature 40°C -
60°C)
ISO-L-HM 46 as per ISO 6743-4
or ISO VG46-HLP as per DIN 51524-2
Heavy duty
(average constant oil temperature above
60°C)
ISO-L-HM 68 as per ISO 6743-4
or ISO VG68-HLP as per DIN 51524-2
Forcoldstoreversiononly:
Light duty
(average constant oil temperature below
40°C)
ISO-L-HM 32 as per ISO 6743-4
or ISO VG32-HLP as per DIN 51524-2
Widely varying conditions of usage
NOTE
All of the applicat
ions specified above can
becoveredusingah
ydraulic oil with a high
viscosity index (m
ultigrade oil).
ISO-L-HV 46 as per ISO 6743-4
or ISO VG46-HVLP as per DIN 51524-3
Bio-hydraulic oil
Panolin HLP Synth 46 highly biodegradable
hydraulic fluid
CAUTION
Damage to the hydraulic system due to mixing
bio-hydraulic oil with mineral oil.
Bio-hydraulic oil must not be mixed with mineral
oils. No recommendations for bio-hydraulic oils
from other manufacturers can be made at the pre-
sent time. Only use approved, pure bio-hydraulic
oil.
Gearbox oil
Binding specification:
ARAL EP Plus SAE80W-90 API GL4
or GL5
or
BP Energear HT 80W-90
or
Castrol Syntrax Universal 80W-90
ENVIRONMENT NOTE
Used oil must be s
tored safely until it is
disposed of acco
rding to the regulations.
Oil must not be all
owed to penetrate the
sewage system or t
he ground. Due to the
issue of disposal
and the specialist knowledge
required, gearbo
x oil changes may only be
performed by the s
ervice partner.
Lubricating grea
se
Linde heavy-duty grease, lithium-saponi-
fied with EP agents and MOS
2
KPF2N-20 as per DIN 51825
Linde spare part no., see spare parts
catalogue
Linde low-temperature grease
AeroShell
Linde spare part no., refer to the spare parts
catalogue
Molycote paste
Linde spare part no., refer to the spare parts
catalogue
210 Operating Instructions – 3888011701 EN – 12/2017