1 Introduction
Receiving the industrial truck
Receiving the industrial truck
Before the industrial truck leaves our factory,
it undergoes a thorough inspection process in
order to guarantee that it is in perfect condition
and that it contains all of the equipment
specified in the order.
In order to prevent complaints from occurring
further down the line, the exact condition
of the industrial truck and the integrity of
the equipment are checked and the proper
handover/acceptance of the truck is confirmed
by the dealer.
CAUTION
Risk of overload on battery female connector.
For trucks that are supplied from the factory without
batteries, a battery female connector is also requi-
red in the MRC version for increased current-car-
rying capacity.
Contact your Service-partner.
The following technical documents belong to
each industrial truck:
• Operating instruction
sforthetruck
• Operating instructions for the attachment
(only applies to trucks delivered from the
factory with an attachment)
• EC/EU declaration of conformity
Customised options
There are separate operating instructions for
the customised options.
NOTE
These separate operating instructions can be
found at the back of the technical information
folder.
8 Operating Instructions – 3888011701 EN – 12/2017
To Next Page
Loading...
