Service work
5
Chassis, bodywork and fittings
NOTE
In extreme conditions, the function and
condition of the restraint system must be
checked on a daily basis prior to starting up
the truck.
e3871539a
1
2
3
Pull out the belt (1) completely and check
for fraying and torn stitching.
Check that the buckle (3) functions correctly
and that the belt retracts properly.
Check the covers and fixing points for
damage.
Test the automatic blocking mechanism.
Park the truck on level ground.
Pull out the belt (1) with a jerk.
The automatic mechanism must stop the belt
being extended out of the belt retractor (2).
Push the driver's seat all the way forwards.
Fold the seat backrest all the way forwards.
NOTE
When opening the bat
tery hood, remember
that a rear window may
have been installed.
Unlock the battery hood and open it by
approx. 30° with the driver's seat.
The automatic mechanism must stop the belt
being extended out of the belt retractor (2).
Close the battery hoo
d.
Operating Instructions – 3888011701 EN – 12/2017 225
To Next Page
Loading...
