4
Operation
Workingwithaload
Operation
NOTE
The mast positioning functi
on is designed to
aid the driver and is purely a
comfort feature.
The responsibility and cont
rol for activating
the required lift mast pos
ition always lie with
the driver.
e3871623a
3
4
5
Briefly press the push button (4).
The green LED (5) lights u
p continuously. The
mast positioning functi
on is switched on.
Operate the joystick (3) and activate the
stored tilt angle.
NOTE
For safety reasons, tilting is possible only
in the direction of the stored tilt angle, and
must be reactivated for each mast positioning
operation.
Once it reaches the stored mast position, the
lift mast remains stationary and the buzzer
sounds.
Release the joystick (3) or briefly press the
push button (4) again.
The LED (5) goes out and mast positioning is
switched off.
The lift mast can now be operated normally
using the joystick (3).
Briefly press the push button (4) again. The
mast positioning function is switched on
again.
160 Operating Instructions – 3888011701 EN – 12/2017
To Next Page
Loading...
