Operation
4
Drive batteries
NOTE
Observe the following procedure, otherwise,
in some circumstances, error codes may be
registered in the display unit.
Switch off the truck.
Push the emergency off switch.
Open the rear cover.
1 2 3
e3871429
Insert the mains-line CEE coupling into the
plug (1) of the battery charger.
NOTE
It is only possible to start the charging process
after the emergency off switch has been
actuated.
e3861500
5
Insert the mains-line CEE plug into the
mains socket (5).
NOTE
The helix cable must not be extended to a
length of more than 2 m.
Operating Instructions – 3888011701 EN – 12/2017 193
To Next Page
Loading...
