Operation
4
Drive batteries
Display_e0046a
End of charging
The charging process is automatically ended
when:
• The charging program is complete and the
battery has been charged
After charging has finished, the green "battery
symbol" indicator light in the display unit lights
up. The battery has been charged to full
capacity.
1 2 3
e3871429
Interrupting charging
Operation of the battery charger requires that
there are no interruptions during the charging
process. However, external factors may
make an interruption of the charging process
necessary.
NOTE
If the fan is blocked or a specific minimum
speed for the fan is not reached, the charging
process is terminated automatically.
DANGER
There is a risk
of serious injury to persons and
damage to pr
operty if the mains plug or the battery
male connect
or is disconnected during a charging
process. The
sparks generated as a result of
disconnect
ing the battery from the battery charger
may ignite
gases formed during the charging
process
.
To end t
he charging process, always press the
push
button (3) (deep discharge start/charging
int
erruption) first. Then disconnect the mains
(r
emove the mains plug).
Ac
tuate push button (3).
Disconnect the mains plug (1) from the
mains socket.
The charging process will restart as soon as
the mains plug is re-inserted into the mains
Operating Instructions – 3888011701 EN – 12/2017 195
To Next Page
Loading...
