2
Safety
Towing
e3871501
1
2
3
4
5
Restoring braking readiness
Once the towing procedure has been per-
formed, braking readiness must be restored.
Unscrew the screw (2) again, r
otating it in
an anti-clockwise direction
to the stop.
Pull out the lever (5) from the opening (4)
again and place the lever back in the bottom
plate.
Fit the bottom plate.
DANGER
The truck must not be driven if the brake system is
defective.
After working on the brake system, check for correct
function. If there are any defects in the brake
system, contact your service partner.
28 Operating Instructions – 3888011701 EN – 12/2017
To Next Page
Loading...
