No. 99MBG518A
E-9
PART E : 2 Method to Test One Point
2.4
Mounting the Indenter
Mount the indenter set in "2.3 Indenter and Test Force Settings" to the main unit of the testing machine.
For details about mounting the indenter, see
"3 Inspection and Replacement of Consumable Parts"
(page H-5) in "PART H Inspection and Maintenance".
2.5
Test Time Settings
Set the test time.
1
Touch the [Force/Time] tab on the "basic operation" block.
» The Test Time settings screen is dis-
played.
2
Set the conditions.
For details about various conditions, see
"2.2 Test Force/Time" (page G-18) in
"PART G Settings".
2.6
GO/NG Judgment Settings
Set the GO/NG judgment for test results as necessary.
When you set the GO/NG judgment, GO/NG is displayed in the test results.
For details about GO/NG judgment, see
"3.2.1 GO/NG Judgment" (page G-28) in "PART G Settings".
To Next Page
Loading...
