Mitutoyo HR-530 Series - Page 178

No. 99MBG518A
E-26
PART E : 3 Method to Set a Group and Test Multiple Points
3.7
Group Settings
Setagroupofvepoints.
1
Touch [Condit.] of the "condition setup" tab block.
» The execution conditions setting screen
is displayed.
2
Touch the [Calc. setting] button on the "basic operation" block.
» The GO/NG judgment and group set-
tings screen is displayed.
3
Touch the [OFF] button in [group].
» The [OFF] button changes into the [ON]
button.