No. 99MBG518A
E-25
PART E : 3 Method to Set a Group and Test Multiple Points
3.3
Indenter and Test Force Settings
Set the indenter and test force.
For details about setting methods, see
"2.3 Indenter and Test Force Settings" (page E-8).
3.4
Mounting the Indenter
Mount the indenter set in "3.3 Indenter and Test Force Settings" to the main unit of the testing machine.
For details about mounting the indenter, see
"3 Inspection and Replacement of Consumable Parts"
(page H-5) in "PART H Inspection and Maintenance".
3.5
Test Time Settings
Set the test time.
For details about setting methods, see
"2.5 Test Time Settings" (page E-9).
3.6
GO/NG Judgment Settings
Set the GO/NG judgment for test results as necessary.
When you set the GO/NG judgment, GO/NG is displayed in the test results.
For details about GO/NG judgment, see
"3.2.1 GO/NG Judgment" (page G-28) in "PART G Settings".
To Next Page
Loading...
