Mitutoyo HR-530 Series - Method to Set a Group and Test Multiple Points

xxi
No. 99MBG518A
3 Method to Set a Group and Test Multiple Points ………………………………… F-17
3.1 Test Method Settings …………………………………………………………… F-17
3.2 Display Conditions Settings …………………………………………………… F-17
3.3 Indenter Settings ………………………………………………………………… F-17
3.4 Mounting the Indenter …………………………………………………………… F-18
3.5 Test Force/Time Settings ………………………………………………………… F-18
3.6 Correction Value Settings ……………………………………………………… F-18
3.7 GO/NG Judgment Settings ……………………………………………………… F-18
3.8 Group Settings …………………………………………………………………… F-19
3.9 Setting the Specimen …………………………………………………………… F-21
3.10 Executing the Test ………………………………………………………………F-22
3.10.1 Executing the Test (First Point) ………………………………………………………… F-22
3.10.2 Indent Measurement (First Point) ……………………………………………………… F-23
3.10.3 Indent Measurement Value Input (First Point) ………………………………………… F-23
3.10.4 ConrmingtheTestResults(FirstPoint) ……………………………………………… F-24
3.10.5 Executing the Test (Second Point) ……………………………………………………… F-25
3.10.6 Indent Measurement (Second Point) …………………………………………………… F-26
3.10.7 Indent Measurement Value Input (Second Point) …………………………………… F-26
3.10.8 ConrmingtheTestResults(SecondPoint) …………………………………………… F-27
3.10.9 Testing from the Third Point Onwards ………………………………………………… F-27
PART G Settings
1 Home Screen …………………………………………………………………………… G-1
1.1 Standard Screen ………………………………………………………………… G-3
1.2 Simple Screen …………………………………………………………………… G-5
1.3 List Average Screen ……………………………………………………………… G-7
1.4 List Screen …………………………………………………………………………G-10
1.5 Multi-Test Screen
(When the Fine-Adjustment Table for Jominy Testing is Connected) ………G-11
1.5.1 X-Axis Position Setting……………………………………………………………………G-12
2 Test Conditions …………………………………………………………………………G-13
2.1 Scale ………………………………………………………………………………G-13
2.1.1 Rockwell/RockwellSupercialHardnessTest …………………………………………G-13
2.1.2 Brinell Hardness Test ……………………………………………………………………G-14
2.1.3 Plastic Hardness Test (ISO 2039-2) ……………………………………………………G-15
2.1.4 Plastic Hardness Test (ASTM D785-B) …………………………………………………G-16
2.1.5 Indent Depth Brinell Hardness Test (VDI/VDE2616) …………………………………G-17