No. 99MBG518A
G-48
PART G : 4 Results
No. Name Details
⑪
Dispersion R Displays the dispersion (maximum value – minimum value) of data
used for the hardness value (average).
Displays the dispersion in the data excluding the maximum and min-
imum values if the group settings are set to exclude the maximum
and minimum values.
⑫
List display button Returns to the list display screen.
⑬
Delete button Deletes the data of the test number that is displayed.
⑭
Print button Touch the test number list to enable the button. Outputs the dis-
played data to an external device.
Set the external output settings to Manual or Automatic to output
data to an external device.
For details about the external output settings, see "3.3 External
Output" (page G-30).
⑮
[Run] button Touch the test number list to enable the button.
Run the test again to overwrite the test results with new test results.
Tips
This is only displayed for the Rockwell hardness test and plastic hardness
test.
Tips
• When performing a retest, if the Run button is touched, [Please lower the table] will be displayed. Lower the
specimen stage and select the [OK] button.
Then, execute the initialization. Raise the specimen stage and start the test.
• If you accidentally touch the test number, touch the test number again to clear the selection.
To Next Page
Loading...
