No. 99MBG518A
B-18
PART B : 6 Installing or Removing the Bellows
4
Put the inner rings (x2) on the vertical shaft.
1 Turn the inner rings (x2) clockwise to put
them on the vertical shaft.
②
①
No. Name
①
Inner rings (x2)
②
Vertical shaft
2 Align the top inner ring with the upper
surface of the vertical shaft.
3 Hold the top inner ring with your hand,
and turn the bottom inner ring coun-
terclockwise to push it upwards until it
makes contact with the top inner ring.
②
①
③
No. Name
①
Upper surface of vertical shaft
②
Top inner ring
③
Bottom inner ring
To Next Page
Loading...
