Section 5 --- Equipment
The Executive 2005
234
SEAT CONTROLS
The Pilot and Co-Pilot seats are adjustable to provide maximum comfort. Seats must be locked in
the forward facing direction while traveling.
NOTE:
The seats operate from 12 Volt DC house power. The ignition must be on to operate the
lumbar/seat support and heater functions.
Memory Contr
ol
To Program a Seat Position:
• Position seat as desired using the Power Base Control. Press the SET button once, then
select the number 1 or 2 Memory Button. The selected Memory Button will illuminate.
When the seat position is memorized the light will turn off.
To Move Seat to a Stored Position:
• Press the desired Memory Button once, the light will illuminate until the seat reaches its
programmed position.
060197m
To Next Page
Loading...
