LP-Gas Systems --- Section 7
The Executive 2005
317
LP-GAS DISTRIBUTION LINES
A primary manifold black steel pipe running throughout the motorhome distributes LP-Gas to
secondary lines. All secondary lines leading to gas appliances are made of copper tubing with flared fit-
tings. If any lines rupture do not attempt to splice them. Always run a new line. It is recommended that
gas distribution work be performed by an authorized dealer or an authorized service technician. When
removing or servicing any gas appliance, manually close the primary valve located on the end of the
LP-Gas tank. This will prevent dangerous gas leakage that could result in an explosion and possible
serious injury.
INSPECTION:
Inspect the rubber flexible lines, twice a year, for abrasions, tears, kinks or other
signs of damage.
If a gas leak is suspected, get the system inspected and repaired by a qualified service technician as
soon as possible.
050257o
LP-Gas Tank
Typical LP-Gas System Layout
To Next Page
Loading...
