- 24 -
Controller Model
Power Capacity
(kVA)
Input Current
(A)
Output Current
(A)
Motor Power
(kW)
220-NICE-L-H-4011 10.0 29.0 27.0 5.5
220-NICE-L-H-4015 12.6 36.0 33.0 7.5
220-NICE-L-H-4018 15.0 41.0 39.0 11.0
220-NICE-L-H-4022 18.3 49.0 48.0 15.0
220-NICE-L-H-4030 23.0 62.0 60.0 18.5
Three-phase 380 V, range: -15% to 20%
NICE-L-H-4002 4.0 6.5 5.1 2.2
NICE-L-H-4003 5.9 10.5 9.0 3.7
NICE-L-H-4005 8.9 14.8 13.0 5.5
NICE-L-H-4007 11.0 20.5 18.0 7.5
NICE-L-H-4011 17.0 29.0 27.0 11.0
NICE-L-H-4015 21.0 36.0 33.0 15.0
NICE-L-H-4018 24.0 41.0 39.0 18.5
NICE-L-H-4022 30.0 49.5 48.0 22.0
NICE-L-H-4030 40.0 62.0 60.0 30.0
NICE-L-H-4037 57.0 77.0 75.0 37.0
NICE-L-H-4045 69.0 93.0 91.0 45.0
NICE-L-H-4055 85.0 113.0 112.0 55.0
1. In terms of single-phase and three-phase 220 VAC, NICE-L-C-2002 and NICE-L-C-2003 are
specially designed for 220 VAC. The other models that are marked by prexing "220-" are modied
from the three-phase 380 VAC models.
2. Same models are available for single-phase 220 VAC and three-phase 220 VAC. Pay attentions
to the power rating of the adaptable motor during the use.
3. Select the proper controller output current based on the rated motor current. Ensure that the
controller output current is equal to or greater than the rated motor current.
4. If you require higher voltage or power rating, contact Monarch.
2.4 Technical Specications
Table 2-2 Technical specications of the NICE1000
new
Item Specication
Basic
specications
Maximum
frequency
99 Hz
Carrier frequency
2–16 kHz, adjusted automatically based on the load
features